UNIST UNIST

ADMISSIONS

Giving UNIST Bulletin
Open mobile menu
 

UNIST site map

Close All menus
STUDENT
 
NEWS CENTER

NEWS CENTER

Discover not only Research Findings and event news, but also the diverse facets of UNIST presented by reporters and writers.

UNIST News

New Electrolyte Extends Lithium Metal Battery Cycle Life Threefold

Published in ACS Nano, the study reveals how interactions between two strongly binding solvents improve lithium deposition and battery stability.

  • Research
  • JooHyeon Heo
  • 2026.10.27
  • 1655

New Electrolyte Extends Lithium Metal Battery Cycle Life Threefold

Abstract

Optimizing the Li+ solvation structure is crucial for improving the electrochemical performance and long-term stability of lithium metal batteries (LMBs). This study presents a Li+ solvation structure in which hetero strongly solvating solvents are colocalized within the first solvation sheath. This structure was realized using nonfluorinated polar solvents, particularly ethylene carbonate (EC) and sulfolane (SL). In conventional electrolytes, solvent–solvent interactions are typically negligible during solvation, as the coordination environment is dominated by individual Li+–solvent binding energy. In contrast, our system revealed that EC and SL exhibit significant intermolecular interactions even within the solvation shell, forming a structurally cooperative solvation environment. This configuration, driving strong solvent–solvent interactions to effectively weaken Li+–solvent interactions, facilitated two critical processes: (1) enhanced Li+ desolvation, enabling more efficient lithium metal deposition, and (2) anion incorporation into the first solvation sheath, stabilizing the solid-electrolyte interphase (SEI). As a result, the optimized electrolyte based on dual strong solvents achieved high lithium metal reversibility (initially 98.24%, 99.35% on average for Coulombic efficiency), enabled stable cycling of lithium metal batteries with high-loading cathodes, and suppressed gas evolution and transition metal dissolution under high-voltage operation.


Solvents that bind strongly to lithium ions typically hinder their deposition in lithium metal batteries (LMBs). Researchers at UNIST and KAIST have discovered that combining two such solvents can weaken these interactions, enabling an electrolyte that extends battery cycle life by approximately threefold.


Led by Professors Hyun-Kon Song of the School of Energy and Chemical Engineering at UNIST and Dong-Hwa Seo of KAIST, the team developed the electrolyte using ethylene carbonate (EC) and sulfolane (SL), two commercially available, nonfluorinated solvents.


LMBs could store substantially more energy than conventional lithium-ion batteries, but unwanted reactions between lithium and the electrolyte consume active lithium and shorten battery life, particularly under high-voltage conditions.


The researchers found that mixing EC and SL in a 3:7 ratio creates a cooperative solvation environment. Although both solvents individually bind strongly to lithium ions, they interact with each other when combined, weakening their bonds with lithium ions. This makes it easier for lithium ions to shed their surrounding solvent molecules before depositing onto the anode. The arrangement also promotes a more stable protective layer at the electrode surface, helping limit lithium loss.


In tests using a high-nickel cathode, batteries with the new electrolyte retained approximately 80% of their initial capacity after 150 cycles, compared with about 50 cycles for those using a conventional carbonate-based electrolyte. Tested at 25°C with an upper charging voltage of 4.5 V, the electrolyte also achieved an initial Coulombic efficiency of 98.24% and an average of 99.35% in lithium plating/stripping measurements. It further reduced gas evolution and nickel dissolution under high-voltage conditions.

Figure 1. Schematic diagram of overall research methodology.

“Combining two strongly binding solvents to weaken their interactions with lithium ions challenges conventional electrolyte design principles,” said Jinki Hong, first author of the study. “The same approach could also improve electrolytes used in conventional lithium-ion batteries.”


“By using commercially available solvents, we improved electrolyte performance without relying on expensive fluorinated solvents or highly concentrated salts,” said Professor Song. “This approach could help extend the service life of high-capacity lithium metal batteries for electric vehicles and energy storage systems.”


The study was published in ACS Nano on August 11, 2026. The research was supported by the Korea Planning & Evaluation Institute of Industrial Technology (KEIT) under the Ministry of Trade, Industry and Energy (MOTIE) and the National Research Council of Science & Technology (NST). Computational resources were provided by the Korea Institute of Science and Technology Information (KISTI) Supercomputing Center, with analytical support from the UNIST Central Research Facilities (UCRF).


Journal Reference

Jinki Hong, Do Sol Cheong, Minjun Kwon  et al ., “Cooperative Solvation of Lithium Ion by Dual Strongly-Solvating Solvents for Reversible Lithium Metal Batteries,”  ACS Nano,  (2026).